How to connect Samsung Galaxy to a computer as a USB modem? The computer does not see the Samsung connected via USB. Internet on a computer via a Samsung Galaxy phone modem and from other Android smartphones How to enable usb on a Samsung j1

Do you want to know how to earn 50 thousand monthly online?
Watch my video interview with Igor Krestinin
=>>

Connecting a Samsung phone to a computer via is not always successful. Sometimes the computer does not recognize the device, does not read its internal memory and does not open folders (but it still charges).

The causes of the problem may be hardware or software. But regardless of this, the first step in resolving the situation is to reboot both contacting devices. In some cases, this is enough; the contents of the smartphone can be viewed again from the PC.

The reasons belonging to this group are related to mechanical issues:

1. The USB cable is damaged.

One of the frequent justifications for the inability to connect the phone to . A cable from an unverified manufacturer does not last long; with active use, it does not last longer than a couple of months, and then it wears out.

But even a high-quality conductor may be unsuitable for use if it is hit by a cutting object, chewed by an animal, and so on. To check for damage in the cable, you need to connect your phone to another PC through it. If the phone is not recognized again, the element will have to be replaced.

1. Damage to the computer USB port.

The cable connection port may also be faulty. This includes a broken USB controller and a damaged south bridge on the motherboard. Correcting the situation, they try to use a different connector. If the move was ineffective, then the root of the problem is somewhere else.

1. Damage to the telephone jack for connection.

If water gets into the connector, or after impacts or scratches, the socket may become completely dysfunctional and will need to be completely replaced.

1. Battery problems.

You need to remove the battery, insert it back and reconnect the device to the computer.

Software reasons

If the above options do not suit your situation, then you can think about software dysfunctions of the devices:

1. Settings.

Using the settings, you need to check the box in the “USB connection to a computer” section so that the phone is perceived by the PC as a “Media device” (“USB drive”). Also, when connecting to a computer, the smartphone must be unlocked.

Non-working or unupdated drivers no longer correctly display the connection status via the USB port. These programs can be restored using the source disk or resources from the website of the organization that produces the motherboard.

This includes cases where the latest phone models require some special programs, but they can also be obtained from the corresponding sites.

1. Unreliable operating system.

The issue can only be resolved by changing the existing OS to a working one.

1. Unreliability of custom (modified) firmware.

Some users do the firmware for their phones themselves, this may be the reason that the computer does not see the Samsung phone via USB. All that remains is to return to the standard firmware version.

1. Viruses.

The usual option, and the problem disappears after using an antivirus and then rebooting the system.

Conclusion

If the above methods are not useful, then you can take a chance and reset the settings. But remember that as a result, the device will lose everything that fills the phone’s internal memory, so you cannot use this method without a reason.

Question: Why doesn't the computer see a Samsung phone connected via a USB cable?. How to connect to the Internet on your computer from a Samsung Galaxy or from other Samsung phones using your phone as a modem? Do you need a special program for Internet access from your phone?

Answer: To connect to the Internet on your computer using a Samsung Galaxy or other Android smartphones as a modem, you do not need additional programs. It is possible that, depending on the version of the operating system installed on your computer, you will need to install the necessary drivers that will help identify your phone connected to the computer with the possibility of further using your phone as a modem. In order not to search the Internet for drivers for Samsung, you can download and install the Samsung Kies program on your computer for free, which will install all the necessary drivers for the Samsung Galaxy and other Samsung phones on your computer, after which you can use the Internet on your PC from your phone using it's like a USB modem. I would like to warn you that it is better to use unlimited Internet on your phone, otherwise a large amount of money will be withdrawn from your account or, even worse, a debt may form (negative balance).
You can download the Samsung Kies program for connecting Samsung phones and smartphones to your computer from the official Samsung website by following this link.

How to connect Samsung to a computer using a USB modem?

After you have connected your phone to the computer, you need to activate the USB modem function on your phone, to do this, do the following steps on the Samsung Galaxy or other Samsung Android smartphones: open Menu / Settings / Other networks / Modem and access point, then connect the Samsung Galaxy to the computer and check the box next to USB modem. That's it, now you can use the Internet on your computer through your phone, using Samsung as a USB modem.

• Reviews, comments, additions, useful tips, questions and answers on the topic how to connect internet on computer via Samsung Galaxy and other smartphones on the Android platform can be added below.
• I hope this article helped you connect your phone to your computer and access the Internet on your PC via your phone modem.
• We kindly ask you to provide mutual assistance and share useful tips with users in troubleshooting problems.
• Thank you for your responsiveness, help and useful advice!!!

08-06-2017
01 o'clock 13 min.
Message:
I did everything as described but little happened. I downloaded the program to no avail, it opens the files but how to connect to the Internet I have xp

08-09-2016
20 o'clock 26 min.
Message:
Download a program to your computer that will help you connect your phone to your computer to use a USB modem. The program will find the driver via the INTERNET - the point is that there is no Internet on the computer, how will it find what?

03-08-2015
13 o'clock 32 min.
Message:
Thank you very much for posting instructions on how to connect the Internet to a computer via a Samsung phone. I suffered from this and couldn’t set it up. Otherwise, I accessed the Internet through a Nokia phone. I tried to set it up like on Nokia but it didn’t work. It turns out that on Samsung it’s completely different and simpler than a steamed turnip. Thanks again.

21-07-2015
17 o'clock 29 min.
Message:
Regarding this issue, this article from the Samsung website helped me: samsung. com/ru/support/skp/faq/444469 I hope it will help others too! :)

01-03-2015
17 o'clock 44 min.
Message:
light up now

Samsung Galaxy S, Ace smartphones and Galaxy Tab tablets are very popular in Russia and are the main competitors of Apple devices. But not all owners of these Samsung devices are aware that their smartphone or tablet can be connected to a computer as a USB modem and access the Internet through it if necessary. Unfortunately, there are some models in the Galaxy series that do not support this feature. These are mainly tablets without a 3G/4G module. But there are few of them. There are no such problems with other Samsung Galaxy models.

How to enable modem mode on Samsung Galaxy?

1. Connect and configure mobile Internet on your phone or tablet.

2. Using the supplied USB cable, connect the device to a computer or laptop running Windows 7, Windows 8 or Windows 10. At the same time, the operating system will begin searching for and installing the driver.
If suddenly the driver was not found and installed, then install the Kies program, but do not run it.

3. On your Galaxy phone or tablet, go to Settings >>> Modem and mobile hotspot:

On some versions of Android this item may not be available, then you need to go to “Advanced settings” or “More”.

4. Check the box USB modem.

If the function has turned on successfully, the corresponding icon will appear in the notification area at the top of the screen.

5. After this, an additional Local Area Network Connection with Internet access should appear on your computer in Network Connections.

The disadvantage of this solution is that only one computer or laptop can be connected to the Internet. But the plus is that your Samsung Galaxy will also be recharged.

• How much RAM does a computer need for...

As a rule, if the computer does not see the Android phone connected to it, then the problem looks like this: the charging process is displayed on the smartphone screen, but there is no access to the files located on it and to the device itself. In this article, you will learn why the computer does not see the Samsung phone via USB.

The reasons may be the following:

Damage to the USB cable

A cable malfunction may not always be immediately visible. Very often, the charging wire can fail without obvious external signs. The reason for this is the low-quality devices that the market is teeming with.

To check the functionality of the USB cable, just connect it to another computer, and for greater reliability, to another phone. If these actions do not produce results, then the wire needs to be replaced.

Damage to the computer USB port

It is impossible to repair the port without the help of a specialist, but you can check it simply. If the computer does not recognize the smartphone, then you need to connect through another USB port. If it helps, it means the cause has been found, if not, let’s move on.

System problems in the phone

Sometimes the problem of lack of connection can be solved very simply: by turning off the smartphone, removing the battery from it for a few seconds, returning it to its place and turning on the device. Simple and effective.

Phone jack failure

If the phone has been damaged by water, or its connector has been mechanically damaged, then this may be the problem. Alas, if cleaning the socket does not give any results, then only replacing the damaged part will help.

Incorrect connection settings

In the device settings, you need to find the menu for USB connection to a computer. In many Samsung models, it is located at “Memory” > “Properties”. If by default the checkbox is next to using USB as a modem, uncheck it, find the “Media device” item and activate it.

Driver problems

They are solved by installing drivers from the “native” disk, or downloading them from the manufacturer’s official website.

Also, the problem may be that power is turned off on some ports on the computer. You can check this by going to the “Control Panel”, finding the item “Hardware and Sound”> “Power Options”> “Power”. Next, open the appropriate settings and click on change additional parameters. In the menu that opens, open the USB options, and then the options for temporarily disabling the USB port. Change its value to “Prohibited” and activate it with the “Apply” button.

Problems with device drivers

In the “Device Manager”, the “Portable devices” item should be without any warning signs. You should also check the functionality of the device through “Properties”. If it is not there, then you need to reinstall the corresponding driver.

Another solution would be to update your smartphone drivers. On the Samsung Galaxy A5, as well as on other models of the brand, this can be done using the Samsung Kies software.

Android OS malfunction or viruses

In this case, cleaning the phone with an antivirus, resetting the settings to factory settings, or completely flashing it can help.

As you can see, there can be a lot of options for why the connected Samsung phone is not located on the computer, so to find a solution you need to be patient. We hope everything works out for you!

Video: how to connect a Samsung smartphone to a computer via USB

A modern smartphone, although a compact device, can be equated in its functionality to a full-fledged computer, but at the same time has the advantages of portable devices. Also, most smartphones are completely autonomous and are able to perform all their functions without the need to connect to a personal computer. On modern phones, all settings and settings are available with just an Internet connection. If your smartphone needs professional repair or setup, contact an official Samsung service center.

If you need new firmware, or you want to save your data from your phone to your PC, then synchronization with your computer is necessary. There are many ways to do this - both wireless, such as wi-fi, Bluetooth and others, and using a cable. The easiest and most reliable way is to connect using USB. How to correctly perform this procedure and troubleshoot connection problems using this method will be discussed in our article.

Connecting a Samsung phone to a computer using USB

To connect a smartphone to a computer using a USB port, you need a smartphone, a laptop and a suitable cord. Typically, smartphones have a mini USB connector, since it is more compact than the standard one. The first step is to connect the cord. Typically, this is the only action you need to perform, since on most devices, the connection will be completed automatically.

If the connection does not happen automatically

• Your device may require additional software. The Samsung Kies program usually comes with every phone. There are also other programs, such as SGS3 Easy UMS, designed specifically to work with the Samsung Galaxy. The popular Samsung ExpressConnect program also has many useful functions.
• You also need to make sure that all drivers are installed and working correctly.
• The connection may have occurred automatically, but the computer is not configured to notify you about it. In this case, you need to look at the taskbar or in Explorer.
• If the connection does not occur, then there may be a malfunction in the devices or cable. Usually the cord for a USB connection wears out quickly, but since the price for it is not high, and most users have more than one, it is possible to try connecting using a different cable.

• A software glitch may also be the cause. In this case, it is recommended to reset the settings to factory level. But it’s always worth remembering that before this procedure you need to save all your important data to another medium. Otherwise, after restoring the settings to factory settings, all your unsaved files will be lost.

If the connection still cannot be established, then the exact cause of the malfunction can be determined by specialists using modern diagnostic equipment.