How to reduce power consumption on a HUAWEI (honor) smartphone? How to prevent the Android screen from going dark - setting up “sleep mode” on your device How to set sleep mode on Huawei

.
A modern smartphone is, first of all, a mobile device. He is with us all the time and we are in touch all the time. Its mobility is both its main advantage and its weakest point: its performance largely depends on the phone’s battery charge. Therefore, the task of managing the power consumption of the phone becomes extremely important.

How to reduce the battery consumption of a Huawei (Honor) phone?

It turned out that battery consumption depends on literally several dozen parameters that need to be taken into account when managing the phone’s power.

Manufacturers of HUAWEI smartphones, understanding the urgency of this task, took this issue very seriously. Now opening the section "Battery" V Settings phone, you can select the most suitable energy saving management mode for any user. It has automatic energy saving control functions, an extreme saving mode and the ability to fine-tune parameters manually.

Screen No. 1 of the smartphone – view of the screen of the “Battery” section in the phone Settings.

This section presents a menu for managing phone energy saving, the items of which can be divided into three groups:
1 group: Power saving modes performed automatically.
2nd group: Mode for optimizing phone parameters to save energy.
3 group: Items for manually setting phone parameters to save energy.

Group 1: Energy saving modes performed automatically.

A) Item power saving mode "Ultra".

This is the most efficient battery saving mode, which allows you to increase the operating time of your smartphone significantly. In this mode, the smartphone blocks access to applications installed on it. Only the most important ones remain included:

• making calls;
• working with phone book contacts;
• sending/receiving SMS messages.

Screen No. 2 of the smartphone – turning on the “Ultra” energy saving mode.

B) Paragraph "Power Saving Mode".

Enabling “Energy Saving Mode” allows you to extend the battery life of the device up to 1.5 hours. When enabled, the screen brightness is reduced, the maximum processor frequency is reduced, and a restriction is introduced on the background operation of applications.

Go to the article describing “Power Saving Mode” - “What does the Leaf icon mean on the screen of a HUAWEI (honor) smartphone? »

Screen No. 3 of the smartphone - turning on “Energy Saving Mode”.

Group 2: Mode for optimizing phone parameters for the purpose of energy saving.

IN) Paragraph "Optimize".

By launching this mode, the phone will analyze the phone's parameters, make suggestions for optimizing important parameters and implement balanced power consumption settings. If you agree with the optimization option, click on the icon "OPTIM." near the selected point.

Screen No. 4 of the smartphone – turn on the “Optimize” mode. Screen No. 5 of the smartphone – selection of optimization items.

Group 3: Items for manually setting phone parameters for the purpose of energy saving.

G) Paragraph "Screen resolution".

By choosing screen resolution settings, you can reduce your phone's power consumption. At this point you can select a function "Smart Resolution", which will automatically reduce screen resolution for optimal energy saving.

Smartphone screen No. 6 – select “Screen resolution”. Smartphone screen No. 7 – enable the “Smart Resolution” function.

D) Point "Launch".

This feature allows you to limit the number of applications that start automatically and use certain power-saving modes. Here you can manually select applications to which these requirements will not apply.

Screen No. 8 of the smartphone – select “Launch”. Screen No. 9 of the smartphone - disable the automatic launch of the “2GIS” and “Documents” applications.

E) Icon "Settings""Battery" section.

At this point, you can control the operation of energy-intensive applications, allow connection in sleep mode, data transfer via W-Fi network and mobile data transfer.

Screen No. 10 of the smartphone – select the “Settings” icon in the Battery section. Screen No. 11 of the smartphone - disable data transfer via Wi-Fi in sleep mode.

A familiar situation: you are reading some information from the screen of your smartphone, and at that moment the display fades out. What if it takes not a few seconds to read, but much more? It is clear that constantly pressing the power button is annoying, to put it mildly.

How to prevent the Android screen from going dark? It turns out that the situation is not as critical as it might seem. There are several ways to solve this, which we will talk about now.

To adjust how your phone's screen turns off using the pre-installed tools, you need to go to " Settings", open section " Screen", select the item " Sleep mode"and set there the time the smartphone is “awake” that is comfortable for you, after which the screen will go dark, or remove sleep mode altogether by checking the corresponding line:

How to disable screen timeout using third-party software

I think it’s not worth going into too much detail about why the “Sleep mode” function is needed, or turning off the screen after a certain period of time (timeout from English - timeout). It is clear that if the smartphone is constantly in active mode, then the battery charge will begin to tend to zero too quickly.

In this case, the problem can be easily solved using special utilities.

Hold Screen On Demo

This program will not let the screen go dark while you are looking at it. Using the front camera, Hold Screen ON captures your gaze and prevents your smartphone from falling asleep. When you stop looking at the screen, it fades and, accordingly, resource consumption stops.

It is possible to bind the operation of the utility to a specific application, and then the phone screen will not go dark, identifying your eyes in this application, however, if your camera works in another application, the program will have to wait until it is free.

Owners of the Samsung Galaxy S3 use this function without installing the utility, since this model has it by default, and if you have a simpler device, then you just need to download Hold Screen ON:

KeepScreen (now free)

Another good application that does a great job of disabling timeout. Unlike the previous one, Keep Screen controls the position of the device using the built-in gyroscope. Therefore, when you hold your gadget in your hands, the utility, taking into account its angle of inclination relative to the horizontal axis, will prevent the screen from going dark.

In addition, there is also the ability to block the screen from turning off on your Android device for selected applications. To do this, after specifying the desired program, click " Start/stop service“, and on the phone, in the screen darkening sensor (see the first screenshot), set the interval to 30 seconds.

Keep Screen takes care of your smartphone's resources and works in the background; to do this, click " On", and after that " Save and restart app».

Important! If you turn off (lock) the device using the power button while the program is running, then after thirty seconds the screen will turn on and will not go off. Therefore, before locking the gadget with the power button, you need to close the application or simply return to the main desktop.

We have nothing more to add on today’s topic, and, of course, you can judge how useful the information presented was. Good luck!

By default, sleep mode, that is, the screen turns off when inactive on an Android smartphone, occurs after 30 or 60 seconds. As a rule, this is more than enough for most users, and turning off the display saves battery power. However, sometimes this time is not enough, so you need to increase the time before entering sleep mode. How to do it? Now you will find out everything.

Disable screen sleep for up to 30 minutes

On most Android smartphones, the maximum time of inactivity before the screen turns off is 30 minutes. If these numbers are enough for you, you just need to change the settings.

Go to the settings section.

Open the "Screen" section.

Find the line “Sleep mode”, tap on it.

Select the maximum period of user inactivity before the screen goes into sleep mode.

All. If necessary, the time can be changed at any time.

How to disable sleep mode completely (for more than 30 minutes)?

If the screen turns off during inactivity for more than 30 minutes, you will have to install a third-party application.

Open Play Market.

Write in search screen alive, click on the search button.

Choose an application, read reviews, install.

Let’s take “Staying Screen” from Active Mobile Applications as an example.

Install and launch. We select an application for which the screen should not go dark, tap on it and see the corresponding icon.

This application should not turn off the screen when there is no user activity at all. Other similar applications, which you can also install from the Play Market, work in much the same way.

All smartphones and tablets running Android have a set time after which the device goes into sleep mode. Most devices go to sleep after 30 seconds of user inactivity. This time is set by default, but not everyone has enough time to read and view content. You can increase it in the settings, and to completely disable the screen timeout, you will have to activate the option in the “For Developers” section or use a special application.

Such a short time before the screen fades out is set for two reasons. Firstly, for security reasons - so that no one can use the device without the owner’s knowledge if he has not blocked it. And the second reason lies in saving battery power.

The fact is that the display backlight drains the smartphone’s battery, so a significant increase in the time after which the screen goes out will reduce the operating time of the device on a single charge. Here it’s worth finding the “golden mean” - setting the timeout so that you feel comfortable using the phone, but at the same time, so that the device does not work for nothing for half an hour if you forget to press the lock button.

Therefore, it is best to disable “falling asleep” of the display only in the necessary programs, and for the entire system set the timeout value within one to two minutes. How to do this is described later in the article.

Other instructions on the topic:

Setting up sleep mode on Android

On any Android smartphone, the screen timeout can be adjusted in the settings. To do this, go to the “Screen” section, on new versions of Android, click “Advanced” and open “Sleep mode”.

In MIUI on Xiaomi, the “Sleep mode” item is located in the “Lock and security” section.

Now select the length of inactivity after which the device will be locked.

On stock Android, you cannot completely disable the timeout (the maximum value that can be set is 30 minutes). But this option is present in firmware, for example: in MIUI on Xiaomi smartphones and in EMUI on Huawei and Honor phones.

But in the section both on stock Android and firmware there is an item “Do not turn off the screen”. If activated, the device will not go into sleep mode while charging.

How to disable screen falling asleep in applications using Stay Alive!

Third-party developers have created dozens of special programs that allow you to disable timeout during charging, for the entire system or for individual applications. In the latter case, the display will not go dark when applications that the user has selected are running or running in the background.

One of the best programs of its kind is Stay Alive! . Moreover, all the necessary functions are available in its free version – that’s what we’ll use. On new versions of Android 5, after installing the application, you will have to allow access to your usage history. When you launch the program for the first time, a warning window will pop up - by clicking the “OK” button, you will go to the “Data Access” section, and there you can select Stay Alive! and provide access to usage history.

If you ignored the message that appeared when you first launched Stay Alive!, you can go to the “Data Access” section as follows: go to “Settings” → “Applications and notifications”, if necessary, click “Advanced”, and select “Special access” " There you will find the “Data Access” item.

In MIUI, the item is called “Applications with data access” and it is located in the “Device Administration” section along the path: “Settings” → “Advanced settings” → “Privacy”.

On Huawei and Honor smartphones, to allow Stay Alive! To track which apps you use, open the Settings menu and go to Security & Privacy → Advanced Settings → Access Usage Statistics. Choose Stay Alive! and turn on the “Track usage” toggle switch.

After launching the application for the first time and granting it the necessary permission, Stay Alive! will start working, and the smartphone will stop going into sleep mode. By default, the “Keep screen on while charging and battery” item will be activated, and the timeout will be completely disabled. To prevent the screen from going dark only during charging, select “Keep screen on while charging”, and if you want to pause the program, click on “Pause Stay Alive!”.

Also using the Stay Alive! You can disable device locking when certain applications are running or running in the background. To do this, activate the “Enable selected apps” function and select the “Keep screen on ONLY for selected apps” option. Then open the “Select apps that will Stay Alive!” and mark the programs you need. To make it easier to search for applications, you can use the search.

To ensure that the device does not “fall asleep” while the selected applications are running, one of two modes must also be activated: “Keep screen on while charging” or “Keep screen on while charging and battery”. If “Pause Stay Alive!” is selected, the program will not work.

To disable timeout for the entire system, except for certain applications, select “Keep screen on EXCEPT for selected apps”, open the list of programs (click “Select apps that will Stay Alive!”) and mark the ones you need.

To reduce battery consumption when sleep mode is disabled, the developer of Stay Alive! added the function “Allow the screen to dim”. If activated, the screen will dim, but not go dark.